flash samsung galaxy tab firmware for enabling phone calls

"step by step" tutorial on how to flash
your Samsung Galaxy Tab Firmware to the
European version ( unbranded firmware )
and therefore enabling the phone calls
option ( and 3G data 850/1900Mhz
WCDMA ) Tested and working.
What do you need?
Download the following package:from here
What's in it?
*.Kies_2.0.0.11011_16_5.exe
*.Odin3 v1.31
*.P1000XWJJ4
*.P1000XXJK5
*.modem_bell_i9000
Preparation:
A . After downloaded the package http://rapidshare.com/files/444576369/Samsung_TAB_Euro_Flash_Package.7z
extracted with 7zip download 7zip from here http://7-zip.org Install and then reboot :
Kies_2.0.0.11011_16_5.exe (this will install
properly drivers x86 or 64 depending on
your OS configuration, needed for your Tab
and Odin to communicate correctly ).
B . Extract Odin3_v1.31_PITupdate and put
the all the files contained in P1000XWJJ4
into Odin3 v1.31 source folder.
C . Set you Samsung Tab into "Download
mode" ( Hold volume down and power
button until the device boot up. You'll see a
yellow android sign and some warning text
like :do not turn off target) and connect it to
your PC with the USB cable.
D . Start Odin3 v1.31.exe and make sure that
the com post is yellow highlighted and
check off Re-partition .
E . Load the following files
F . Hit Start and then relax, hopefully it is
going to be ok and in about 2. min and
50you'll get a green highlight and pass
stamp in the same Odin screen which will
also reboot the Tab. It will be In Russian, but
not to worry. keep reading below.
G . Turn offf the tab and set it to download
mode again. Transfer over the Odin folder
the P1000XXJK5.tar file re-start Odin,
Connect the phone.
H . Leave the "Re-partition" unticked and
load into "PDA" the tar file. Hit "Start" and
wait again about 2min and 50 sec, you'll get
the same green pass and the tab will reboot.
I. This is the final step. now you are going to
flash the tab with the right Modem files.
Again like Put the Tab into download mode
unpack the modem_bell_i9000.zip into Odin
folder then start Odin up and select "phone".
Load the modem.bin up and hit Start. Wait
for the Green pass and you are DONE!!!